High Brightness Rent LED Screen Waterproof Indoor Led Video Walls
RGB SMD 3 In 1
1. SMD3-in-1 technology is used for indoor LED Display
2. Wide view angle: 140 in horizontal and 140 in vertical.
3. Special design and advanced SMT technology improves the heat
dissipation.
4, With high refresh rate controller, guarantee that no scan line
when taking photos.
5. Regular shape and special shape(such as curve, round) can be
designed.
6. Easy for assembling and connection with the connector added.
7, High color uniformity and clear image can bring you a vivid
audio visual effect.
8. Both front access and rear access are available.
| Product Parameter |
| 1 | Pixel Information | Pixel Pitch | 5.33mm |
| Pixel Density | 35,200dots/m² |
| Pixel Configuration | 1R1G1B |
| 2 |
Viewing | Brightness | ≥3500 CD/m² |
| View Angle | 140°/140° |
| Optimum Viewing Distance | >5m |
| Gray Level | RGB/8192/14bit |
| 3 | Power Supply | Working Voltage | 110V~±15% or 230V~±15% |
| Max Power Consumption | 900W/m² |
| 4 | Ambient Conditions | Operating Temperature | -20°C~+60°C |
| Operating Humidity | 35%-85% |
| 5 |
Processing | Driving Method | 1/8scan, Constant Current |
| Refresh Rates | ≥800Hz |
| Signal Input | RF,S-VIDEO,RGB,RGBTV,YUT,YC,COMPISITION |
| Control System | Sending card + Receiving card + Hub card +PCTV Non-liner card +
Muti-funcational card(Optional) + Video processor(Optional)
+ Fiber Transmitter (Optional) |
| 6 |
Cabinet | Cabinet thickness | < 8cm |
or Designed by requirements |
| Cabinet weight | < 10kg/cabinet |
| Cabinet size | Normal 640 x 640mm |
| Cabinet material | Aluminum alloy or Iron, Steel |
| 7 |
Others | Life Span | >100,000hours |
| Blind Spot Rate | <0.00001 |
| LED encapsulation | SMD3528 |
| Color Temperature/contrast | Brightness and contrast of red, green and blue
can be adjusted by software. |
| Image Processing | Video denoising, rapid motion compensation,
edge sharpening, edge smoothing |
Color coordinate conversation & control,
grey scale transformation etc |
| Brightness uniformity | Ratio of min pixel brightness/ max pixel<0.9
(when each color reaches its highest brightness) |
| Effective control distance | Cat-5<100M, Muti-mode fiber: <500M;
single- mode fiber<20Km |
>> Introduction
1) SMD3-in-1 technology is used for indoor LED Display.
2) Wide view angle: 140 in horizontal and 140 in vertical.
3) Special design and advanced SMT technology improves the heat
dissipation.
4) with high refresh rate controller, guarantee that no scan line
when taking photos.
5) Regular shape and special shape (such as curve, round) can be
designed.
6) Easy for assembling and connection with the connector added.
7) High color uniformity and clear image can bring you a vivid
audio visual effect.
8) Both front access and rear access are available.
9) Items: BESD-IFP4, BESD-IFP5, BESD-IFP5.33,BESD-IFP6,
BESD-IFP7.62, BESD-IFP8, BESD-IFP10
>> Display Image Performance
1. wide view angle DIP/SMD LED is used for improving the view
areas,meanwhile,make the LED display more smoothly.
2. High brightness and waterproof DIP/SMD LED is used for
outdoor,and low brightness SMD LED for indoor.
3. High conformity of color and brightness makes the color of the
display images more vivid.
4. High contrast ratio and high refresh rate technology makes the
LED display peiformed well without any timelapse. 4.High contrast
ratio and high refresh rate technology makes the LED display
peiformed well without any timelapse.
5. Each specified LED cabinet can be guaranteed with the same
brightness and color in different orders.This calibration
technology is helpful for rental companies to extend the display as
they like.
6. Item:BESD-IFP4, BESD-IFP5, BESD-IFP6, BESD-IFP7.62, BESD-IFP8,
BESD-IFP10,
BESD-OFP10,BESD-OFP12,BESD-OFP12.5,BESD-OFP16,BESD-OFP20,BESD-OFP25etc.
